Non-uniform corrosion of steel rebar and its influence on reinforced concrete elements` reliability
References
- Blikharskyy, Y.Z., 2019. Mechanical Properties of Thermally Hardened A500s Reinforcement, Mater Sci, 55, 175-180, 2019. DOI: 10.1007/s11003-019-00285-010.1007/s11003-019-00285-0
- Bobalo, T., Blikharskyy, Y., Kopiika, N., Volynets, M., 2019. Serviceability of RC Beams Reinforced with High Strength Rebar’s and Steel Plate, Lecture Notes in Civil Engineering, 47, 25-33, DOI: 10.1007/978-3-030-27011-7_410.1007/978-3-030-27011-7_4
- Chernin, L., Val, D., 2012. Efficiency of Modelling Corrosion-Induced Cover Cracking in RC Structures, Conference: 8th International Conference: Concrete in the Low Carbon Era, CTU Congress At: Dundee, UK, 1-11.
- Christodoulou, C., Goodier, C.I., 2014. Corrosion management of reinforced concrete structures, Loughborough University’s Institutional Repository-Concrete (London), UK, 37-39.
- Goyal, A., Pouya, H.S., Ganjiam, E., Claisse, P., 2018. A review of corrosion and protection of steel in concrete, Arabian Journal for Science and Engineering, 43, 5035–5055, DOI: 10.1007/s13369-018-3303-2.10.1007/s13369-018-3303-2
- Li, Q.; Ye, X., 2018. Surface deterioration analysis for probabilistic durability design of RC structures in marine environment, Structural Safety, 75, 13-23, DOI: 10.1016/j.strusafe.2018.05.007.10.1016/j.strusafe.2018.05.007
- Luo, D., Li, Y., Li, J., Lim, K. S., Nazal, N. A.M., Ahmad, H., 2019. A recent progress of steel bar corrosion diagnostic techniques in RC structures, Sensors, 19(1), 34, DOI: 10.3390/s19010034.10.3390/s19010034633900330583463
- Matesová, D., Teplý, B., Podroužek, J., Chromá, M., 2007. Probabilistic modeling of steel corrosion in RC structures, Proc. of 3rd Central European Congress on Concrete Engineering, CCC, Brno University of Technology, Brno, Czech Republic, 337-342.
- Sadeghi, K., Musa, M.K.; Nassrullah, H.M., 2019. Corrosion problems in RC structures: an overview of causes, mechanism, effects, controls and evaluation, Academic Research International, 10(2), 15-28.
- Silva, M.V.F., Pereira, M.C., Codaro, E.N., 2015. Carbon steel corrosion:an everyday approach for chemistry teaching, Quim. Nova, 38(2), 293-296, DOI: 10.5935/0100-4042.20140313.10.5935/0100-4042.20140313
- Tantele, E.A., Votsis, R.A., Kyriakides, N., Georgiou, P.G., Ioannou, F.G., 2017. Investigation on the thermographic detection of corrosion in RC structures, Fifth International Conference on Remote Sensing and Geoinformation of the Environment (RSCy2017), International Society for Optics and Photonics, 10444, 104441, DOI: 10.1117/12.2281183.10.1117/12.2281183
- Yogalakshmi, N.J., Rao, K.B., Anoop, M.B., 2020. Durability-Based Service Life Design of RC Structures–Chloride-Induced Corrosion, Reliability, Safety and Hazard Assessment for Risk-Based Technologies, Springer, Singapore, 579-590, DOI: 10.1007/978-981-13-9008-1_48.10.1007/978-981-13-9008-1_48
Language: English
Page range: 67 - 72
Submitted on: Mar 17, 2020
Accepted on: May 25, 2020
Published on: Jun 25, 2020
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Related subjects:
© 2020 Yaroslav Blikharskyy, Nadiia Kopiika, Jacek Selejdak, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.