Design of the Machine Parts Subjected to Elastic-Plastic Contact Conditions

Michal Kráčalík

doi:10.2478/rput-2019-0019

Abstract

The paper deals with a methodology of designing the machine parts subjected to elastic-plastic contact conditions. Elastic-plastic contact conditions are simulated by finite element (FE) simulation. As the result, the estimation of contact loading stresses in practice can be made using contact geometry, material datasheet or tensile test.

References

[1] NEMETZ, A. W. et al. 2018. FE temperature- and residual stress prediction in milling inserts and correlation with experimentally observed damage mechanisms. Journal of Materials Processing Technology, 256, pp. 98-108. [Online]. http://www.sciencedirect.com/science/article/pii/S092401361830040210.1016/j.jmatprotec.2018.01.039
Search in Google Scholar Back to article
[2] BRECHER, CH., ESSER, B., FALKER, J., KNEER, F., FEY, M. 2018. Modelling of ball screw drives rolling element contact characteristics. CIRP Annals, 67, pp. 409-412, 2018. [Online]. http://www.sciencedirect.com/science/article/pii/S000785061830133110.1016/j.cirp.2018.04.109
Search in Google Scholar Back to article
[3] MAO, K. 2007. Gear tooth contact analysis and its application in the reduction of fatigue wear. Wear, 262, pp. 1281-1288. [Online]. http://www.sciencedirect.com/science/article/pii/S004316480600268710.1016/j.wear.2006.06.019
Search in Google Scholar Back to article
[4] WIEST, M., KASSA, E., DAVES, W., NIELSEN, J. C. O., OSSBERGER, H. 2008. Assessment of methods for calculating contact pressure in wheel-rail/switch contact. Wear, 265, pp. 1439-1445, Contact Mechanics and Wear of Rail/Wheel Systems - CM2006. [Online]. http://www.sciencedirect.com/science/article/pii/S004316480800179810.1016/j.wear.2008.02.039
Search in Google Scholar Back to article
[5] MAJZOOBI, G. H., ABBASI, F. 2017. On the effect of shot-peening on fretting fatigue of Al7075-T6 under cyclic normal contact loading. Surface and Coatings Technology, 328, pp. 292-303. [Online]. http://www.sciencedirect.com/science/article/pii/S025789721730877010.1016/j.surfcoat.2017.08.067
Search in Google Scholar Back to article
[6] KRÁČALÍK, M., TRUMMER, G., DAVES, W. 2016. Application of 2D finite element analysis to compare cracking behaviour in twin-disc tests and full scale wheel/rail experiments. Wear, 346-347, pp. 140-147. [Online]. http://www.sciencedirect.com/science/article/pii/S004316481500489510.1016/j.wear.2015.11.013
Search in Google Scholar Back to article
[7] WEI DA-SHENG, SHI LIANG, WANG YAN-RONG. 2015. Cyclic plastic behavior of dovetail under fretting load. Engineering Failure Analysis, 55, pp. 100-114. [Online]. http://www.sciencedirect.com/science/article/pii/S135063071500159410.1016/j.engfailanal.2015.05.009
Search in Google Scholar Back to article
[8] SASAGAWA, K., NARITA, J. 2017. Development of thin and flexible contact pressure sensing system for high spatial resolution measurements. Sensors and Actuators A: Physical, 263, pp. 610-613. [Online]. http://www.sciencedirect.com/science/article/pii/S092442471630563510.1016/j.sna.2017.07.024
Search in Google Scholar Back to article
[9] DU FEI, LI BAOTONG, ZHANG JIE, QUAN ZHU MIN, HONG JUN. 2015. Ultrasonic measurement of contact stiffness and pressure distribution on spindle–holder taper interfaces. International Journal of Machine Tools and Manufacture, 97, pp. 18-28. [Online]. http://www.sciencedirect.com/science/article/pii/S089069551530052310.1016/j.ijmachtools.2015.06.007
Search in Google Scholar Back to article
[10] DÖRNER, F., KÖRBLEIN CH., SCHINDLER, CH. 2014. On the accuracy of the pressure measurement film in Hertzian contact situations similar to wheel-rail contact applications. Wear, vol. 317, pp. 241-245. [Online]. http://www.sciencedirect.com/science/article/pii/S004316481400197510.1016/j.wear.2014.06.010
Search in Google Scholar Back to article
[11] SOLLE, J., LINARES, J. M., SPRAUEL, J. M., MERMOZ, E. 2012. Optical measurement for the estimation of contact pressure and stress. CIRP Annals, 61, pp. 483-486. [Online]. http://www.sciencedirect.com/science/article/pii/S000785061200130810.1016/j.cirp.2012.03.128
Search in Google Scholar Back to article
[12] HAN XINGHUI, HUA LIN. 2013. 3D FE modelling of contact pressure response in cold rotary forging. Tribology International, 57, pp. 115-123. [Online]. http://www.sciencedirect.com/science/article/pii/S0301679X1200250210.1016/j.triboint.2012.07.012
Search in Google Scholar Back to article
[13] NAJJARI, M., GUILBAULT, R. 2014. Modeling the edge contact effect of finite contact lines on subsurface stresses. Tribology International, 77, pp. 78-85. [Online]. http://www.sciencedirect.com/science/article/pii/S0301679X1400156X10.1016/j.triboint.2014.04.024
Search in Google Scholar Back to article
[14] BLANCO-LORENZO, J., SANTAMARIA, J., VADILLO, E. G., CORREA, N. 2018. A contact mechanics study of 3D frictional conformal contact. Tribology International, 119, pp. 143-156. [Online]. http://www.sciencedirect.com/science/article/pii/S0301679X1730486310.1016/j.triboint.2017.10.022
Search in Google Scholar Back to article
[15] Datasheet: 1.4545 (15-5PH®), S155500 | METALCOR
Search in Google Scholar Back to article
[16] FARAHMAND, B., NIKBIN, K. 2008. Predicting fracture and fatigue crack growth properties using tensile properties, Engineering Fracture Mechanics, 75, pp. 2144-2155. [Online]. http://www.sciencedirect.com/science/article/pii/S001379440700388810.1016/j.engfracmech.2007.10.012
Search in Google Scholar Back to article
[17] JOHNSON, K. 1985. Contact Mechanics. Cambridge: Cambridge University Press. doi:10.1017/CBO978113917173110.1017/CBO9781139171731
Open DOI Search in Google Scholar Back to article
[18] FKM2012; Rechnerischer Festigkeitnachweis für Maschinenbauteile. 2012: VDMA Verlag, ISBN 978-3-8163-0605-4 (in German)
Search in Google Scholar Back to article

Design of the Machine Parts Subjected to Elastic-Plastic Contact Conditions

Abstract

Paradigm

My account