References
- Balčiūnas, G., Vėjelis, S., Vaitkus S. & Kairytė, A. (2013) Physical properties and structure of composite made by using hemp hurds and different binding materials. Procedia Engineering, 57.
- Barbhuiya, S. & Bhusan, B.D. (2022) A comprehensive review on the use of hemp in concrete. Construction and Building Materials, 341. https://doi.org/10.1016/j.conbuildmat.2022.127857.
- Benmahiddine, F., Bennai, F., Cherif, R., Belarbi, R., Tahakourt, A. & Abahri K. (2020) Experimental investigation on the influence of immersion/drying cycles on the hygrothermal and mechanical properties of hemp concrete. Journal of Building Engineering, 32. https://doi.org/10.1016/j.jobe.2020.101758.
- Bennai, F., Hachem, C.El, Abahri, K. & Belarbi, R. (2019) Influence of hydric solicitations on the morphological behavior of hemp concrete. RILEM Tech. Lett., 4. https://doi.org/10.21809/rilemtechlett.
- Delannoy, G., Marceau, S., Glé, Ph., Gourlay, E., Guéguen-Minerbe, M., Diafi, D., Issam Nour, I., Amziane, S. & Farcas, F. (2018) Aging of hemp shiv used for concrete. Materials and Design, 160. https://doi.org/10.1016/j.matdes.2018.10.016.
- EN 1097-3: 2002 Tests for mechanical and physical properties of aggregates – Part 3: Determination of loose bulk density and voids.
- EN 12350-6:2019 Testing fresh concrete – Part 6: Density.
- EN 12390-3:2019 Testing hardened concrete – Part 3: Compressive strength of test specimens.
- EN 12390-7:2019 Testing hardened concrete – Part 7: Density of hardened concrete.
- EN 12667:2001. Thermal performance of building materials and products – Determination of thermal resistance by means of guarded hot plate and heat flow meter methods – Products of high and medium thermal resistance.
- EN 826:2013. Thermal insulating products for building applications – Determination of compression behaviour.
- Jami, T., Karade, S.R. & Singh, L.P. (2019) A review of the properties of hemp concrete for green building applications. Singh Journal of Cleaner Production, 239. https://doi.org/10.1016/j.jclepro.2019.117852.
- Kosinski, P., Brzyski, P., Szewczyk, A. & Motacki, W. (2018) Thermal properties of raw hemp fiber as a loose-fill insulation material. J. Nat. Fib., 15.
- Kosinski, P., Brzyski, P., Tunkiewicz, M., Suchorab, Z., Wisniewski, D. & Palczynski, P. (2022) Thermal properties of hemp shives used as insulation material in construction industry. Energies, 15, 2461. https://doi.org/10.3390/en15072461.
- Law of the Republic of Lithuania on fibrous hemp. 2013 (in Lithuanian).
- Obuka, V. (2021) Sapropel for the Development of Biocomposite Materials: Properties and Application Possibilities. Doctoral Thesis. https://www.geo.lu.lv/fileadmin/user_upload/LU.LV/Apaksvietnes/Fakultates/www.gzzf.lu.lv/Zinatne/Vairas_dr_final_kopsavilkums_ENG.pdf.
- Pietruszka, B., Gołębiewski, M. & Lisowski, P. (2019) Characterization of Hemp-Lime Bio-Composite. IOP Conference Series: Earth and Environmental Science, Volume 290, Central Europe towards Sustainable Building (CESB19). 2-4 July 2019, Prague.
- Seng, B, Magniont, C. & Lorente S. (2019) Characterization of a precast hemp concrete block. Part II: Hygric properties. Journal of Building Engineering, 24. https://doi.org/10.1016/j.jobe.2018.09.007.
- Seng, B., Magniont, C. & Lorente, S. (2018) Characterization of a precast hemp concrete. Part I: Physical and thermal properties. Journal of Building Engineering, 24. https://doi.org/10.1016/j.jobe.2018.07.016.
- Tronet, P., Lecompte, Th., Picandet, V. & Baley, Ch. (2016) Study of lime hemp concrete (LHC) – Mix design, casting process and mechanical behaviour. Cement and Concrete Composites, 67. https://doi.org/10.1016/j.cemconcomp.2015.12.004.